SDS

A listing of SDS's
SAFETY DATA SHEET
Crystalbond, temporary adhesive I590
1. IDENTIFICATION
Product Identifiers
Product Name:
Crystalbond, temporary adhesive I590
Other Names:
Crystalbond, temporary adhesive
Product Number(s):
50402-01, 50402-02, I590
CAS Number:
Not available
Recommended use of the chemical and restriction on use
Laboratory use. Temporary Mounting Adhesive
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Skin Irrit. 2 H315 Causes skin irritation.
Skin Sens. 1 H317 May cause an allergic skin reaction.
STOT SE 3 H335 May cause respiratory irritation.
Eye Dam. 1 H318 Causes serious eye damage.
Resp. Sens. 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled
Label Elements
Signal Words
Danger
Hazard Statement(s)
H315 Causes skin irritation
H318 Causes serious eye damage
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H317 May cause an allergic skin reaction.
H335 May cause respiratory irritation.
Precautionary Statement(s)
Avoid breathing dust/fume/gas/mist/vapours/spray
Wash thoroughly after handling.
Use only outdoors or in a well-ventilated area.
Contaminated work clothing must not be allowed out of the workplace.
Wear protective gloves / eye protection / face protection.
[In case of inadequate ventilation] wear respiratory protection.
If on skin: Wash with plenty of water.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a poison center/doctor.
Specific treatment (see on this label).
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
If experiencing respiratory symptoms: Call a poison center/doctor.
Wash contaminated clothing before reuse.
Store in a well-ventilated place. Keep container tightly closed.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
Primary route(s) of entry
Not available
Human Health
Inhalation:
May cause respiratory irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled
Ingestion:
Not available
Eyes:
Causes serious eye damage
Skin:
Causes skin irritation
Environment
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
phthalic anhydride
85-44-9
>50-≤100%
Not Available
ethanediol
107-21-1
>10-≤25%
Not Available
4. FIRST AID MEASURES
Ingestion
Immediately call a doctor.
Inhalation
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor
Other Information
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use fire fighting measures that suit the environment
HAZCHEM
No further relevant information available
Special protective equipment and precautions for fire fighters
No further relevant information available
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
No further relevant information available
Environmental precautions
No special measures required
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
7. HANDLING AND STORAGE
Precautions for safe handling
Ensure good ventilation/exhaustion at the workplace.
Prevent formation of aerosols
Conditions for safe storage
No special requirements
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
107-21-1 ethanediol
25* ppm
-
50* ppm
10** mg/m³
Engineering controls
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the skin.
Avoid contact with the eyes and skin.
Personal protective equipment
Eye and face protection
Avoid contact with the eyes
Skin protection
Avoid contact with the skin
Body protection
Wash hands before breaks and at the end of work. Immediately remove all soiled and contaminated clothing
Respiratory protection
No further relevant information available
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Solid amber bar
Odour
Odorless
pH
Not determined
Vapour Pressure
0.1 hPa (0.1 mm Hg) at 20 °C (68 °F)
Density
Not determined
Boiling Point
>149 °C (>300.2 °F)
Melting Point
Undetermined
Solubility
Not miscible or difficult to mix
Specific Gravity of Density
Not determined
Flash Point
263 °C (505.4 °F)
Flammable (Explosive) Limits
Not flammable
Explosion limits:
Lower: 1.7 Vol %
Upper: 53 Vol %
Ignition Temperature
410 °C (770 °F)
Formula
No further relevant information available
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available
Chemical stability
Stable under normal conditions
Possibility of hazardous reactions
No dangerous decomposition products known
Conditions to avoid
No further relevant information available
Incompatible materials
No further relevant information available
11. TOXICOLOGICAL INFORMATION
Acute effects
85-44-9 phthalic anhydride
Oral LD50 4,200 mg/kg (rat)

107-21-1 ethanediol
Oral LD50 5,840 mg/kg (rat)
Dermal LD50 9,530 mg/kg (rabbit)
Eye contact
Strong irritant with the danger of severe eye injury
Skin contact
Irritant to skin and mucous membranes
Ingestion
No further relevant information available
Inhalation
No further relevant information available
Toxicity and irritation
The product shows the following dangers according to internally approved calculation methods for preparations:
Harmful
Irritant
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available
Persistence and degradability
No further relevant information available
Bioaccumulative potential
No further relevant information available
Other adverse effects
No further relevant information available
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed of together with household garbage. Do not allow product to reach sewage system
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
No further relevant information available

UN Number
UN1760
Proper shipping name
CORROSIVE LIQUID, N.O.S. (PHTHALIC ANHYDRIDE)
Transport hazard class
Class 8
Packing group
PG III
Environmental hazard
Not applicable
Special precautions for users
Special precautions for user Warning: Corrosive substances
· Danger code (Kemler): 80
· EMS Number: F-A,S-B
· Segregation groups Acids
· Stowage Category A
· Stowage Code SW2 Clear of living quarters.
Additional information
Quantity limitations On passenger aircraft/rail: 5 L
On cargo aircraft only: 60 L

Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 1000 mL

Limited quantities (LQ) 5L
· Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30 mL
Maximum net quantity per outer packaging: 1000 mL
15. REGULATORY INFORMATION
Poisons Schedule Number
TLV (Threshold Limit Value established by ACGIH)
85-44-9 phthalic anhydride A4
107-21-1 ethanediol A4
Other Information
16. OTHER INFORMATION
SDS preparation date
5 September 2022
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...