SDS

A listing of SDS's
SAFETY DATA SHEET
Collodion 2% in Amyl Acetate - Sterile
1. IDENTIFICATION
Product Identifiers
Product Name:
Collodion 2% in Amyl Acetate - Sterile
Other Names:
Sterile Collodion (Parlodion) 2% in Amyl Acetate
Product Number(s):
12620-10, 12620-50, 12620-55, EMS12620-10, EMS12620-50, EMS12620-55
CAS Number:
Not available.
Recommended use of the chemical and restriction on use
Laboratory chemicals.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS02 Flame
Flammable Liquids 3 H226 Flammable liquid and vapour.
Label Elements
Signal Words
Warning
Hazard Statement(s)
Flammable liquid and vapour.
Precautionary Statement(s)
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Keep container tightly closed.
Ground/bond container and receiving equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available
Human Health
Inhalation:
Not available
Ingestion:
Not available
Eyes:
Not available
Skin:
(or hair) Take off immediately all contaminated clothing. Rinse skin with water/shower.
Environment
In case of fire: Use CO₂, powder or water spray to extinguish.
Store in a well-ventilated place. Keep cool.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
AMYL ACETATE, REAGENT
628-63-7
>50-≤100%
Not Available
4. FIRST AID MEASURES
Ingestion
If symptoms persist consult doctor.
Inhalation
Supply fresh air; consult doctor in case of complaints.
Skin Contact
Generally the product does not irritate the skin.
Eye Contact
Rinse opened eye for several minutes under running water.
Other Information
No further relevant information available.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
CO₂, sand, extinguishing powder. Do not use water.
HAZCHEM
For safety reasons unsuitable extinguishing agents: Water with full jet.
Special protective equipment and precautions for fire fighters
No special measures required.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Do not flush with water or aqueous cleansing agents.
7. HANDLING AND STORAGE
Precautions for safe handling
No special precautions are necessary if used correctly.
Keep ignition sources away - Do not smoke.
Protect from heat.
Protect against electrostatic charges.
Conditions for safe storage
Keep receptacle tightly sealed.
Protect from heat and direct sunlight.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
628-63-7 AMYL ACETATE, REAGENT
100ppm
525mg/m³
Engineering controls
Wash hands before breaks and at the end of work.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
Wear protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Not available
Respiratory protection
Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
Colourless liquid
Odour
Fruit-like
pH
Not determined
Vapour Pressure
5.3 hPa
Density
0.8752 g/cm³
Boiling Point
149°C
Melting Point
-70.8°C
Solubility
1.8g/l
Specific Gravity of Density
Not available
Flash Point
23°C
Flammable (Explosive) Limits
Lower: 1.1 Vol%
Upper: 7.5 Vol%
Ignition Temperature
360°C
Formula
Not available
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
no further relevant information available.
11. TOXICOLOGICAL INFORMATION
Acute effects
Not available.
Eye contact
No irritating effect.
Skin contact
No irritant effect.
Ingestion
Not available
Inhalation
Not available
Toxicity and irritation
Not available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 1: slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
For safety reasons unsuitable extinguishing agents: Water with full jet.

UN Number
UN1104
Proper shipping name
RQ Amyl acetates
Transport hazard class
Class 3 Flammable liquids
Packing group
III
Environmental hazard
Not applicable.
Special precautions for users
Warning: Flammable liquids
Hazard identification number (Kemler) code: 30
EMS Number: F-E
Stowage Category: A
Additional information
DOT
Quantity limitations:
On passenger aircraft/rail: 60L
On cargo aircraft only: 220L
Hazardous substance: 5000lbs, 2270kg
ADR
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30mL
Maximum net quantity per outer packaging: 1000mL
IMDG
Limited quantities (LQ) 5L
Excepted quantities (EQ) Code: E1
Maximum net quantity per inner packaging: 30mL
Maximum net quantity per outer packaging: 1000ml
15. REGULATORY INFORMATION
Poisons Schedule Number
Not available
Other Information
A Chemical Safety Assessment has not been carried out.
16. OTHER INFORMATION
SDS preparation date
17 March 2023
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...