SDS

A listing of SDS's
SAFETY DATA SHEET
Sodium Hydroxide, Pellets, Reagent, A.C.S.
1. IDENTIFICATION
Product Identifiers
Product Name:
Sodium Hydroxide, Pellets, Reagent, A.C.S.
Other Names:
Not available
Product Number(s):
21160, 21160-SP, 21162
CAS Number:
1310-73-2
Recommended use of the chemical and restriction on use
Laboratory chemicals.
Company Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
Emergency Contact Details
ProSciTech Pty Ltd
11 Carlton Street
KIRWAN QLD 4817
Australia

(07) 4773 9444
www.proscitech.com
2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
GHS05 Corrosion
Met. Corr. 1 H290 May be corrosive to metals.
Skin Corr. 1A H314 Causes severe skin burns and eye damage.
Eye Dam. 1 H318 Causes serious eye damage.
GHS07
Acute Tox. 4 H302 Harmful if swallowed.
Label Elements
Signal Words
Danger
Hazard Statement(s)
May be corrosive to metals.
Harmful if swallowed.
Causes severe skin burns and eye damage.
Precautionary Statement(s)
Keep only in original container.
Do not breathe dusts or mists.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Wear protective gloves/protective clothing/eye protection/face protection.
Primary route(s) of entry
Not available.
Human Health
Inhalation:
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Ingestion:
Call a POISON CENTER/doctor if you feel unwell. Rinse mouth. Do NOT induce vomiting.
Eyes:
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POSON CENTER/doctor.
Skin:
(or hair) Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.
Environment
Absorb spillage to prevent material damage.
Store locked up.
Store in corrosive resistant container/container with a corrosion resistant inner liner.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Name
CAS No.
Content (w/w)
Classification
Sodium Hydroxide, Pellets, Reagent, A.C.S.
1310-73-2
Not Available
4. FIRST AID MEASURES
Ingestion
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Inhalation
In case of unconsciousness place patient stably in side position for transportation.
Skin Contact
Immediately wash with water and soap and rinse thoroughly.
Eye Contact
Rinse opened eye for several minutes under running water. Then consult a doctor.
Other Information
Immediately remove any clothing soiled by the product.
5. FIREFIGHTING MEASURES
Suitable extinguishing equipment
Use fire extinguishing methods suitable to surrounding conditions.
HAZCHEM
No further relevant information available.
Special protective equipment and precautions for fire fighters
No special measures required.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Environmental precautions
Do not allow to enter sewers/surface or ground water.
Methods and materials for containment and clean up
Use neutralising agent.
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
7. HANDLING AND STORAGE
Precautions for safe handling
Thorough dedusting.
Conditions for safe storage
Keep container tightly sealed.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Standards
Material
TWA ppm
TWA mg/m3
STEL ppm
STEL mg/m3
Peak limitation 2mg/m³
Engineering controls
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Personal protective equipment
Eye and face protection
Tightly sealed goggles.
Skin protection
Protective gloves. The glove material has to be impermeable and resistant to the product/the substance/the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Body protection
Protective clothing.
Respiratory protection
Not required.
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Appearance
White pellets
Odour
Odourless
pH
Not applicable.
Vapour Pressure
3.5hPa
Density
2.13g/cm³
Boiling Point
1388°C
Melting Point
323°C
Solubility
420g/l
Specific Gravity of Density
Not available
Flash Point
Not applicable.
Flammable (Explosive) Limits
Not determined
Ignition Temperature
Not determined
Formula
NaOH
10. STABILITY AND REACTIVITY
Reactivity
No further relevant information available.
Chemical stability
No decomposition if used according to specifications.
Possibility of hazardous reactions
No dangerous reactions known.
Conditions to avoid
No further relevant information available.
Incompatible materials
No further relevant information available.
11. TOXICOLOGICAL INFORMATION
Acute effects
Oral LD50 2000 mg/kg (rat)
Eye contact
Strong caustic effect.
Skin contact
Strong caustic effect on skin and mucous membranes.
Ingestion
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of oesophagus and stomach.
Inhalation
No sensitising effects known.
Toxicity and irritation
Not available.
12. ECOLOGICAL INFORMATION
Ecotoxicity
No further relevant information available.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Other adverse effects
Water hazard class 1: slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Must not reach sewage water or drainage ditch undiluted or unneutralised.
13. DISPOSAL CONSIDERATIONS
General information
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.
14. TRANSPORT INFORMATION
ADG label required
HAZCHEM
No further relevant information available.

UN Number
UN1823
Proper shipping name
1823 SODIUM HYDROXIDE, SOLID
Transport hazard class
Class 8 Corrosive substances.
Packing group
II
Environmental hazard
Not applicable.
Special precautions for users
Warning: Corrosive substances.
Hazard identification number (Kemler code): 80
EMS Number: 8-06
Segregation groups: Alkalis
Stowage Category: A
Segregation Code: SG35 Stow "separated from" SGGI-acids.
Additional information
Limited quantities (LQ) 1kg
Excepted quantities (EQ) Code: E2
Maximum net quantity per inner packaging: 30g
Maximum net quantity per outer packaging: 500g
Transport category: 2
Tunnel restriction code: E
15. REGULATORY INFORMATION
Poisons Schedule Number
S5, S6, S10
Other Information
A Chemical Safety Assessment has not been carried out.
16. OTHER INFORMATION
SDS preparation date
12 September 2023
Comments
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
This Safety Data Sheet (SDS) has been prepared in compliance with the Preparation of Safety Data Sheets for Hazardous Chemicals Code of Practice February 2016. It is the user's responsibility to determine the suitability of this information for adoption of necessary safety precautions. The information published in this SDS has been compiled from the publications listed in Section 16: to the best of our ability and knowledge these publications are considered accurate. We reserve the right to revise Safety Data Sheets as new information becomes available. Copies may be made for non-profit use.

... End of SDS ...